MS THESIS

MS PROJECTS

• Eltarazi, Safwan, “Operational Tolerance Allocation and Machine Assignment under Process Capability and Product Value Constraints”, May 2005.
• Liu, Wei, “A Comprehensive System for Non-conformance Tracking and Diagnosis” December 2003.
• Guohua, J., “Optimization Approach for The Evaluation of Geometric Errors in Computer-Aided Inspection”, December 2000.
• Wang, M., “Mathematical Verification Algorithms for Geometrically Toleranced Features”, January 1998, Received the 1999 Wichita State University Best Dissertation Award.
• Suharitdamrong, V., “Recognizing Machining Features From B-Rep Model Using Volume-Based Method”, 1997.

• Adibi, Azadeh, “Significant Facotrs on Geometric Form Error Evaluation,” December 2004.
• Soppin, Mahesh, “Comparative Analysis Of Production Control Systems Through Simulation,” July 2004.
• Srinath, Balaji, “A Fuzzy Rule Based Inspection System for Gear Hobbing Process,” May 2004.
• Krishnaiyer, Krishna, “Ants Algorithm: Manufacturing Applications”, October 2003.
• Swaminathan, Sriram, “An Integrated System for Tool and Cutting Parameter Selection in End Milling Titanium Alloy (TI-6Al-4V), Summer 2003.
• Sheelavant, Ravindra, “Algorithms for the Selection of an Alternate Process Plan to Complete a Semi-finished Part,” Fall 2002.
• Thirta, Manjunath, “An Expert Process Control System,” Fall 2001, Received the best graduate project award at the Engineering Open house 2001 of Wichita State University.
• Kotogal, Ramachandra Sharma, “An Advanced Decision Support System for Supplier Selection,” Fall 2001, (Valvoline – Ashland, Atlanta, GA).
• Gardner, Tom, “An Examination of the Effect of Datum Target Errors on Feature of Size Position Acceptance,” Spring 2001 (Boeing Commercial Aircraft, Wichita).
• Subramanian, Muthu, “Decision support system for supplier selection,” Fall 2000 (Demandtra Corporation, Boston, MA).
• Chidambaram, Solayappan, “Statistical Investigation of the effect of drill bit geometric parameters on its quality,” Summer 2000 (Adexa Corporation, Atlanta, GA).
• Wu, Shibao, “A vision-based system for the inspection of drill bit geometry,” Summer 2000.
• Nagarajan, Rajaram, “Parametric study of the effect of laser cutting variables on the cut quality,” Summer 2000, (Motorola Corporation, Austin, TX).
• Hemanth, B. K., "Scheduling of uniform parallel batch processing machines", Fall 1999.
• Vishwaram, “Scheduling of a machining center with size constraints”, Fall 1999, Received the best graduate project award at the Engineering Open house 1999 of Wichita State University.
• Meyappan, M., “A dynamic System for Control of Assembly Operations”, Fall 1999.
• Yousuf, M. A., “Automated Inspection Plan Generation for Geometric Tolerance Verification in Feature Based CAD Environment”, Spring 1999.
• Monikoth, S., “Development and Implementation of Tolerance Analysis and Allocation for Tapered Surfaces”, Fall 1998.
• Krishnappa, P., “Automatic Generation of Virtual Gages for the Verification of Geometrically Toleranced Features”, Fall 1998.
• Natarajan, H., “A Metamodel Approach for Optimizing Stochastic Computer Simulation”, Fall 1998.
• Arupathi, R., “Process Analysis and Control System: Algorithms for Process Plan Selection and Dynamic Decision Support”, Fall 1998 (Senior Consultant ACC Oracle Corporation, North Carolina).
• Hajar, M., “Statistical Analysis of Hole Quality Assessment Using Acoustic Emission Parameters”, Summer 1997 (Manufacturing Engineer, Boeing Commercial Aircraft Group, Wichita).
• Chen, X., “Dynamic Tolerance Charting System,” Spring 1997, (Verne Q. Powell, Inc., Boston).
• Everson, C., “Acoustic Emission Technique for Inspection of Precision Drilled Holes”, December 1996, (Boeing, Wichita).
• Ramani, B., “Dimension Normalization and Representation in CAD Systems for Computer Aided Assembly Tolerance Analysis,” 1996, (Dimensional Control Systems, Detroit), Co-chaired with Dr. Janet M. Twomey.
• Shamsaasef, R., “An Object-Oriented Database Scheme for a Feature-based CAD/CAM System” 1996, (A company in Connecticut), Co-chaired with Dr. S. Motavalli.
• Lim, H. S., “A Shape Matching Technique for Convex Shape Objects,” 1996, (Motorolla, Singapore).

• Sheshpalli, Srinivas, “Understanding the Concepts of Supply Chain Management through Fictional Company,” Summer 2004.
• Sharma, Sanjay, “Spreadsheet Application for Tolerance Charting,” Fall 2001.
• Balasundaram, S., “A Generic Implementation of Bill of Materials Processing,” Spring 1998.
• Kabirdass, V., “A Relational Database Management System for a Foundry,” Spring 1997.
• Postier, T. M., “Recycling/Reutilization of Composite Materials,” November, 1996, (Boeing Commercial Aircraft Group, Wichita).
• Ahmed, N., “Quality Improvement in a Sand Casting Process,” May, 1996, (Quality Control Engineer, Wichita).
• Abbaraju, S., “An Object-oriented Expert System for Statistical Process Control,” April, 1996, (GE, New product development, Plainville, CT).
• Venkatapathy, S., “Application of Client/Server Relational Database for Manufacturing Functions,” November, 1995, (UPS, Chicago).
• Valaboju, A. K., “Design and Implementation Issues for Computer Integrated Manufacturing (CIM) Databases,” August, 1995 (a company in Missouri).
• Kececi, E., “Feature-based Design: A Survey,” July, 1995.