|
 |
menu |
 |
Professional
Community Service
| Community Service |
|
|
Reviewer for the following Journals and Agencies
|
|
|
Reviewer for Promotion and Tenure: Served as external reviewer for about thirty Universities some of which are Lehigh University in Bethlehem, Pennsylvania (2000,1999), University of Western Ontario (1999), University of Idaho in Moscow, Idaho (1999,1998), Indiana University-Purdue University at Indianapolis (1996), University of Oklahoma in Norman, Oklahoma (1994), Case Western Reserve University in Cleveland, Ohio (1993), Pennsylvania State University in College Park, Pennsylvania (2000,1992), University of Windsor in Windsor, Ontario (1991). |
|
|
Member, Several National Science Foundation Review Panels during the last decade. |
|
Reviewed several books for West Educational Publishing and Taylor & Francis since 1991 |
| Top |
| Society Service | Top |
|
|
Chair, ASME-FED Committee on Emerging Topics 1992-Present | |
|
|
Member of the Fluid Mechanics Committee of the Fluids Engineering Div. of ASME 1990-Present | |
|
Member of the Fluid Mechanics Committee of the Applied Mechanics Div. of ASME 1990-Present | |
|
Member of the Multiphase Flow Committee of the Fluids Engineering Div. of ASME 1992-Present | |
|
Member of the Polymers Committee of the Materials Division of ASME 1992-Present | |
|
Member of the Materials Processing Committee of the Materials Div. of ASME 1996-Present | |
|
Member, Organizing Committee, 60th Meeting of the Society of
Rheology, Gainesville, Florida, February 12 - 15 1989 |
|
|
Program Chairman, ASME Chattahoochee Section 1984-1985 |
| University Service | Top |
|
|
Dean, College of Engineering , Wichita State University - 2000-Present |
|
|
Member, Academic Affairs Council,WSU - 2000-Present |
|
Member, Deans Council,WSU - 2000-Present |
|
Member, Search Committee for the Executive Director of the National Institute for Aviation Research (NIAR) - 2001-2002 |
|
Member, Search Committee for Endowed Boeing Global Learning Professorship at WSU - 2000-2001 |
|
Member, Committee to establish a B.S. program in Bioengineering at NJIT - 1999 |
|
Chair, Department of Mechanical Engineering, New Jersey Institute of Technology - 1998-2000 |
|
Member, Search Committee for the Director of Laboratories for
Biomedical Devices, New Jersey Institute of Technology |
|
|
Representative of the New Jersey Institute of Technology
to a statewide Committee to facilitate the interface with the Health
Care Institute of New Jersey to organize joint Symposia and other activities of interest to pharmaceutical industry - 1998-2000 |
|
|
Member, representing NJIT, Operations Advisory Group (OAG), The New Jersey Center for Biomaterials and Medical Devices sponsored by NJIT, UMDNJ and Rutgers University - 1998-2000 |
|
Chair, Mechanical Engineering Colloquia, New Jersey Institute of Technology - 1998-2000 |
|
Member, Search Committee for the Pappas Bioengineering Chair, New Jersey Institute of Technology .1998-1999 |
|
|
Member, Search Committee for the Microelectromechanical Systems
(MEMS) Chair, New Jersey Institute of Technology .1998-1999 |
|
|
Member, Search Committee for the Director of Materials Science and Engineering Program, New Jersey Institute of Technology .1998 |
|
Member, Selection Committee for the Summer Award Program, New
Jersey Center for Biomaterials and Medical Devices, Rutgers University, 1998 |
|
Chair, Committee developing the new semester based curriculum
to be implemented as part of the transition at Auburn from the quarter to the semester system - 1997 |
|
Started the drive to establish two Pi Tau Sigma undergraduate
scholarships in the ME Department at Auburn University through his personal fund-raising initiative - 1997 |
|
Member, Selection Committee for Top Doctoral and Master's Students, Auburn University 1997 |
|
Member, Graduate Council Curriculum Committee, Auburn University 1996-1997 |
|
Member, Graduate Council Committee on Theses/Dissertations, Auburn University 1996 |
|
Member, Curriculum Committee, College of Engineering, Auburn University 1996-1997 |
|
Member, Selection Committee for the Distinguished Graduate Faculty Lecturer, Auburn Univ 1996 |
|
Member, Faculty Search Committee in Mechanical Engineering, Auburn University 1996 |
|
Chair, Curriculum Committee, Department of Mechanical Engineering, Auburn University 1996 |
|
Chair, Mechanics Academic Area, Dept. of Mechanical Engineering, Auburn University 1996 |
|
Member, Graduate Council, Auburn University 1994-1997 |
|
Advisor to the Chi Chapter in Auburn of Pi Tau Sigma, the National
Honorary Mechanical Engineering Society ..1994-1997 |
|
Reappointed to Graduate Faculty at Auburn University for a seven year term 1994 |
|
Invited by Tau Beta Pi to hold EIT Reviews, Spring and Fall of 1989 & Spring of 1990 |
|
Representative of Auburn University to the policy committee of SECTAM, the Southeastern Conference on Theoretical and Applied Mechanics .1990-1993 |
|
Representative of the College of Eng. to the University Faculty Grievance Committee .1990-1993 |
|
Representative of the Department of Mechanical Engineering to the Engineering Council of the College, Auburn University - 1989-1991 |
|
|
General Faculty Advisor, to the undergraduate students, Department of Mechanical, Auburn University - 1989-1993 |
|
Chair, Academic Program Review Committee initiated by the Alabama
Commission on Higher Education to review the programs of the Department of Aerospace Engineering at Auburn University 1988 |
|
Appointed to Graduate Faculty at Auburn University for a seven year term - 1987 |
|
Chair, Mechanical Engineering Colloquia, Auburn University .1985-1991 |
| Top |